🇺🇦 Ukraine Red Cross Fund Raiser 🇺🇦

Support Ukrainian refugees by donating to the Red Cross campaign to help buy vital supplies for people fleeing from the recent invasion.

What is Screen Printing?

The screen printing process is a versatile printmaking technique that allows you to quickly stencil the same design on multiple items such as clothing e.g. DIY T-shirt printing at home or screen printing a poster.

Ink is transferred using a synthetic mesh stretched across a frame and a stencil is created by blocking off a negative image of the desired design (ink goes where the open spaces are). This screen printing process guide will walk you through how to screen print at home, even if you are a complete beginner.

Sustainable Printmaking Guide

Help Improve This Screen Printing Guide!

You can checkout the Reddit Printmaking Forum for more ideas and information. Feel free to contact me through the contact form to contribute & improve this guide. You can also check the comments at the bottom of the guide.

Affiliate Disclosure: I only recommend products I would use myself and all opinions expressed here are our own. This post may contain affiliate links that at no additional cost to you, I may earn a small commission when you purchase. These commissions help with the running costs of this website, if you do purchase via one of the product links many thanks it is greatly appreciated!

Screen Printing Kits

Click here to find the best screen printing kits.

Screen Printing Inks

Click here to find the best screen printing inks.

Printmaking Books

Click here to find books on printmaking.

Tools & Materials For Screen Printing

You can find links for the required tools and materials in the table below! You will need the following items before you start screen printing at home – check out Cat Spit Productions for an idea of different setups.

Screens - 43T for Textiles / 90T+ for PaperWood Screen Printing Frame - A3 43T Mesh | Wood Screen Printing Frame - A3 90T Mesh
Scoop/Trough (for coating screen with emulsion)Photo Emulsion Coating Trough - 330mm Wide
Screen Print Desk ClampsScreen Printing Hinges Registration Clamps
Sheet of Glass (same size as screen frame size)Find Local Glass Manufacturer
Exposure Unit/1000w Light Rig (I made one at home to start with)Ebay |
Pressure Washer/High Powered HoseGarden Hose Pipe & Jet Nozzle | Black & Decker Pressure Washer
Hair Dryer / Iron (for textile printing)Hair Dryer | Clothes Iron
SqueegeesVarious Screen Printing Squeegees | Quality Aluminium Squeegees
T-ShirtsFruit Of The Loom Shirts
Waterbased InksDaler Rowney System 3 Inks
Scrubby Pads/ClothsJ Cloths - 50 x Blue Cloth
Pregasol F - Screen DecoaterKiwo Pregasol K-FL - 1 Litre Pot
Azocol Z1 - Screen Print EmulsionKiwo Azocol Z 135 Violet - 1 Pot 1KG
Pregan NT9 - Screen Printing DegreaserKiwo Pregan NT9 - 1 Pot 5 Litre
Spray BottlesSpray Bottles - 1 x 750ml Bottle
Paper Towel/Brillo Pads/Blue RollSirius Blue Roll - 6 x Rolls
Spatula (For Mixing Ink)Icing Spatula - 3 x Spatula Sizes
Brown TapeBrown Packing Tape - 1 Roll 48mm x 66m
Printing Medium - Textiles/Paper Medium DifferentSystem 3 Printing Medium - 1 x 250ml Pot (Designed for paper & textile)
Acetate Sheet/Tracing PaperFEVERWORK 20Pcs A4 Inkjet Film

Paper VS Textile Screen Printing

There are pros and cons for printing on paper and textiles, each of them have their own uses which are case dependent on what you want to create/produce. For the purpose of this guide, we will be covering textile printing on t-shirts, however, this process can also easily be used for paper printing. Throughout the screen printing guide I’ll recommend alternative materials where there are any changes in the technique for paper/textiles.

Screen Printing Paper

Paper screen printing can be used to create posters and large format artworks. It enables you to produce multiple copies of the same artwork, with the potential to make each with their own character so no print is the same! This can be achieved by trying different coloured inks or papers.

Screen printing on paper is often used to create: fine artworks, business stationery, packaging and a variety of marketing materials. You’ll be surprised to know that a lot of products and things around you are in fact screenprinted!

Screen Printing Textiles

Textile screenprint is great for creating t-shirts which this guide covers, but you can also screenprint other materials and garments such as bed sheets, tea towels, tote bags, and socks to give your least favorite family member at Christmas.

Dependent on what you want your finish to be you can use a variety of inks and methods to create your final garment which will be worn by millions of people around the world MIC DROP.

Types Of Mesh For Screen Printing

When you screen print on paper/textiles you have to use a different mesh to restrict the amount of ink that is pushed through the mesh/screen onto the substrate. With textiles printing you need to allow more ink to come through the mesh, as the garment has to absorb the ink.

Whereas on paper you don’t need as much ink to absorb into the substrate, so you use a tighter mesh. Mesh counts can be found on the table below and go up in units of “T” which stands for “threads per inch”.

Textile Screen Printing Mesh

If you’re screen printing on textiles you will probably be printing t-shirts. So ask yourself, will you wear this t-shirt? Or is it just for fun? Because if it’s just for fun, leave, leave now … this isn’t for you.

When screen printing on textiles you need to use a lower mesh count, as this is to allow more ink to print onto the garment. I would advise using a 43T mesh if you are screen printing on T-shirts, this mesh count is a standard with most T-shirt screen printers.

You may also find that you need a higher or lower mesh count dependent on the material that your printing onto or the inks you print with. For this guide, we don’t have to worry, be happy, we’re a little bit more chilled-out around here and WE will be using 43T mesh.

Paper Screen Printing Mesh

On the other hand, when screen printing on paper you’ll have to use a higher mesh count. A safe bet is to use a minimum of 90T screen but I would advise a 120T mesh from personal experience, as it allows you to get higher detailed artwork or image.

Please refer to the table below for an idea of what materials are best suited for the screens, paper and card.

Table Of Mesh Counts & Uses

The information in the table below was taken from Wicked Printing Stuff Mesh Guides, this has been a great guide for me over the years.

Mesh CountMaterial/Ink
Beach Towels, Pennant Inks, Glitter Inks, Thicker Inks
Textile Inks, Opaque Inks Textile, T-shirts
Textile Inks, Finer Textile Design, Water Based Inks
Enamel Inks, Very Fine Textile In Or Coarse Plastisol Ink Printing
Mesh CountMaterial/Ink
77TPaper & Board Inks, & Textile
Vinyl Inks, Plastic Inks, Plastisol Inks, Solvent Based, Paper & Board
Halftone Printing, Paper & Board Vinyl Plastic, Plastisol Etc
U.V Printing, Or Very Fine Halftone Work, Solvent Inks

Types Of Inks For Screen Printing

You can use a variety of screen printing inks. The main two you’ll come across are water-based and plastisol inks. This guide will cover the use of water-based inks. However, with some more research, you can use this guide with plastisol inks as the process is the same.

Water-based Screen Printing Inks

Water based screen printing ink is more environmentally friendly and is advised for beginners and home use. It is available to purchase from your local Hobby Craft. I’d advise using system 3 screen printing inks to start with. You’ll find that with most water-based screen printing inks you’ll have to mix them with printing medium and some water. This is to stop the inks drying in the screen mesh and also control how dense the ink is.

With some water-based inks you will find they are pre-mixed, this is case dependent on who you purchase from. With water-based inks, they can be air-dried on the garment and on paper. You may need to heat the ink on the textile/garment with an iron or heat gun to help cure the ink and seal it into the garment, making it machine-washable.

This is a very important step or you’ll have a lot of angry customers with a one-coloured wardrobe. Water-based inks can be washed away with water and a cloth, with no chemicals needed.

Water-based inks are also thinner than plastisol inks, it may be required to print an underbase of white on dark garments. On light garments printing should be fine.

Pros of Water Based InksCons of Water Based Inks
Cleaned easily with waterDry in screen quickly unless using retarder
Can use hairdryer to seal inksHard to match pantone colour after ink has dried
Can be used on paperInk can look washed out on darker textile/material
Eco friendly to some extent
Easy to use for beginners

Ink & Medium

Mix Waterbased Inks 50/50 with Textile Medium

Mixed Inks

Mixed pots of screen printing ink

Plastisol Inks

Plastisol inks on the other hand require a lot more work because they have to be cured under a heat lamp/flash dryer to cure the inks otherwise the ink does not dry. They also require solvents to clean up the inks after printing, which are not environmentally friendly. The inks contain plastic particles which is the reason they have to be heated up and melted with a flash dryer to cure them.

However, some key benefits are having longer-lasting inks and inks that are a lot more vibrant and colourful on all garments, regardless of the colour. It is advised to only use plastisol on textiles and garments.

Pros of Plastisol Based InksCons of Plastisol Based Inks
Designed for textile printingCant be cured on paper
Colour consistencyHave to be cured using flash dryer
Colour densityNot Eco friendly (Contain plastic)
Can easily be matched to Pantone ColourConcern for health after long time using plastisol
Inks do not dry on screenChemicals have to be used for cleaning

For the purpose of this tutorial we shall be working with water based screen printing inks as they are more accessible for beginners to use.

Squeegees For Screen Printing

There are a variety of squeegee blades that you can use for screen printing, some are demonstrated in the image above or below (I haven’t decided yet). This guide covers 90 degree squared blade, which is best for both textile and paper printing. You can check out this squeegee blade guide from Anatol for further information.

Types Of Squeegee Blade

Types of Squeegee blades by beta-chemical.com

Squeegee Materials

Watch the video below for information on what materials/types of squeegee blades that are available for screen printing and how they can affect the quality of your print. You can check out Floodway Print Co on youtube for some great explainer videos on screen printing.

Lights For Screen Printing Exposure

Exposure lights are one of the key tools for screen printing, without them you cannot expose your screens and all your efforts would be in vein. However, with the right lights, you can expose your screens, as an alternative you can expose your screens under natural sunlight.

You can either purchase a UV exposure kit/unit which can be quite expensive or you can buy a cheap 1000wat halogen light on eBay and build your own which I have pictures of below. You must be very careful with self-built exposure lights as there is always a fire risk when using these, please don’t leave them unattended.

The units I have built with 1000wat halogen flood lights have been made with the light at about 15 inches away from the screen. A safe bet for exposure time of your screens is around about 4 minutes, this can vary dependent on your setup so you will need to experiment. Please refer to the table below which has a rough idea of different heights and lights.

Two other key points when exposing your screens before printing:

  1. Place a blacked-out material that sits under the screen and fits the inner edges of the screen frame and pushed very tightly on the underside of the screen mesh.
  2. Place a sheet of glass on top of the screen roughly the same size as the outer edge of the screen frame where you put your film positive to create a seal.

An example of this is a sheet of wood with black foam stuck to it, bare in mind the heat produced from the light may warp the foam. This is to make sure the artwork does not move when you expose your screen, otherwise, this may cause ghosting. This will be covered in more detail in the steps below.

Current 1000w Screen Printing Exposure Light

1000w Halogen Light

Current 1000w Screen Printing Exposure Light

A1 Size homemade 1000w screen print exposure unit turned on

A1 Homemade 1000w Light

A1 Size homemade 1000w screen print exposure unit turned on

A1 Size homemade 1000w screen print exposure unit

A1 Homemade 1000w Light

A1 Size homemade 1000w screen print exposure unit

A1 Size homemade 1000w screen print exposure unit being built

A1 Size Exposure Light

A1 Size homemade 1000w screen print exposure unit being built

1st homemade 1000w screen print exposure unit

Screen Printing Light

1st homemade 1000w screen print exposure unit

Films & Positives For Screen Printing Exposure

There are multiple ways you can create your positive for you screen printing which basically allows the design to be exposed on the screen. When setting up your artwork any lines of blocks of colour will make up the film positives.

You can print these onto transparency paper, however, when printing onto transparencies you need to make sure the ink/toner of the positive is very dense so no light can get through. It’s advisable to use a toner printer to achieve this or seek out a printing firm who may be able to advise you on this.

Remember to align your film positives before printing if using multiple colours and ensure that the black/key layer overlaps all other colour layers with a slight bleed. Also, remember to mirror or reverse the film positive when laying it onto the screen. Use registration marks in the corners as well to align when printing. The following article on Preparing Artwork for Screen Printing in Adobe Illustrator by Smashing Magazine.

Checking density of screen printing film positives

Checking Film Positives

Checking density of screen printing film positives

Dense screen printing film positives

Screen Print Film Positives

Dense screen printing film positives

Great video about the best way to print screen print transparencies for screen printing from NateScreenPrints.

Area/Setup For Screen Printing

There are a number of options depending on your budget and requirements. You can either buy your own screen printing carousel for t-shirt printing or buy a vacuum bed for paper printing, however, these can cost a lot of money unless you find a good deal online.

Alternatively, you could build your own screen printing bench or carousel or buy speedball screen printing clamps. Check out the plans on building a 4 colour screen printing press.

Personally I have tried both, building my own setup from self-sourced materials and later purchasing equipment. When starting out I would advise building a simple setup to see if you enjoy it as much as I do! Then later down the line, if you decide you do want to explore screen printing and want to commit to preparing a more permanent advanced setup on a regular-use basis you can purchase a setup online, or potentially find a good deal on eBay, as I did.

As an example, I spent £500 on a second-hand Wicked Printing Stuff 8-colour screen printing carousel. Then I spent £100 on the therapy for spending that much. Then another £100 on a 10 foot by 8-foot screen printing vacuum bed.

Screen printing T-Shirt with clamps

Screen Printing Clamps

Basic T-Shirt printing setup with clamps

Screen printing T-Shirt with clamps

Screen Printing Clamps

Basic T-Shirt printing setup with clamps

Basic poster screen printing setup with clamps

Screen Printing Clamps

Poster screen printing setup with clamps

Basic T-Shirt printing setup with cheap 4 colour carousel

Basic T-Shirt printing setup with cheap 4 colour carousel

The Screen Printing Process Step by Step

Step 1 – Decide What to Print On

Equipment Needed


You can print onto paper.


You can print a T-Shirt.

Firstly, you will need to decide whether you want to print on paper or textiles, as this will determine the type of screen you use (more details below):

Tips for deciding:

  • For printing on textiles (why not try DIY T-Shirt printing at home) you’ll need to use a screen with a low mesh count of around 43T to allow more ink to pass through to the material you are printing onto
  • For printing on paper you’ll need to use a screen with a mesh count of at least 90t − I use 120t for my own projects
  • Mesh size indicates how many threads of mesh cross each square inch; higher mesh count = finer mesh and lower mesh count = coarser mesh
  • Fabrics need more ink to absorb so they last longer after repeated washing, this is why you use a 43T mesh to allow more ink through to the fabric

T Shirts for screen printing

Paper for screen printing

Paper for screen printing

Step 2 – Preparing Your Screen/Mesh For Printing

Equipment Needed

Screen Frame With Mesh

Your screen frame with mesh fitted.

Degreaser (Pregan NT9)

Degreaser to remove grease from mesh.

Water & Sponge

Water and sponge to clean screens after degreasing.


Make sure to wear gloves!


Make sure to wear goggles!

De-grease your screen to make sure the emulsion stays on the mesh, using pregan NT9 degreasing agent.

Tips for de-greasing your screen:

  • Clean thoroughly using a sponge, wear some gloves
  • Wear goggles to make sure no chemicals get in your eyes
  • Rinse the screen with water to make sure there is no residue of the de-greaser left over
  • Dry with towel/rags and leave in dust free area
Degreasing screens for printing

Degrease Screens

Degrease screens before coating with emulsion

Equipment Needed

Screen Printing Emulsion

Screen printing emulsion to coat screens.

Screen Printing Trough

Screen printing trough to spread emulsion.

The next part of the screen print at home process needs to happen in a dark/dim-lit room (during the evening is safest!) because emulsion is sensitive to UV light.

Tips for coating your screen:

  • Pour the emulsion into a trough/scoop and apply to the screen at a 45 degree angle, starting at the bottom and working upwards making sure there is an even coating
  • Then move your screen into an upright position and capture any excess emulsion with your scoop
  • Leave the screen to dry horizontally on a level surface in the darkened room
  • Make sure the area is as dust-free as possible, as dust can contaminate the drying emulsion, potentially ruining later exposure of design
Coat screen with emulsion

Uncoated Screen

Coat clean screen with emulsion

Screen coated with emulsion

Coated Screen

Screen coated with emulsion

Step 3 – Design & Planning For Screen Printing

Equipment Needed

Transparency Film/Acetate

Film for your positives to print with.


Computer to plan artwork on.


Pen or pencil to plan design with.


Printer to print design onto acetate.

Now for the creative part of the screen printing process. You can create your screen print design by hand, but it’s much easier to use your PC (e.g. Photoshop). Check out this preparing artwork for screen printing in Adobe Illustrator guide.

All designs should be printed onto transparency paper/acetate and be opaque, use a toner printer for this or contact a professional printer.

Tips for planning your design

  • Your design should be slightly smaller than your pre-prepared screen and only use a maximum of 3 colours as it will need separating into individual layers per colour
  • Lighter colours should be overlapped by darker layers
  • You will need to include registration marks on your design to help to align the layers during printing, refer to this Youtube video on registering your screens
  • Once you are happy with your design, print it out (using the highest quality print settings) on the rough side of transparent film (I find low weight/gram tracing paper also works well)
  • The design on the film needs to be opaque so no light reaches the emulsion. Make sure you let it dry properly!

Put double-sided tape on film to keep design aligned

Setting film out on T Shirt for planned screen print

Setting film out on T Shirt for planned screen print

Setting film out on T Shirt for planned screen print

Flim stuck to screen to help keep it in place when exposing

Step 4 – Exposing Your Screens

Equipment Needed

Design on Acetate

Printed design on acetate.

1000 Watt Light

1000 watt light for exposing screens.

Glass Sheet

The glass used for exposing screens.

Emulsion Coated Screen Mesh

Screen coated with light-sensitive emulsion.

Now your design is ready for exposure onto the emulsion so it’s back to your dimly-lit room and your screen coated with now-dried emulsion. You need to lay your design which is printed on film/transparency paper on top of the screen & then expose to light. My setup with a 1000w light takes about 4 minutes of exposure. Once exposed you have to use a jet wash and clean out the emulsion that has not been exposed.

Tips for exposing screens

  • Place a block of blacked-out material underneath the mesh area of your screen, snugly place your design on top of the mesh side, then position a sheet of glass on top to create a flat surface with no gaps
  • The exposure time needed will vary depending on how far your screen is from the light and how powerful the light is (wattage) Use the charts provided or follow the next tip
  • Using a 1000w light that is about 15 inches away from the screen, expose for about a minute, then turn the light off

Information for the 2 charts taken from:Wikibooks Screen Printing

With a 150W Bulb, Clear Incandescent

Screen SizeBulb HeightExposure Time
8"x10"12 Inches45 Minutes
10"x14"12 Inches45 Minutes
12"x18"15 Inches1 hr. 14 Minutes
16"x20"17 Inches1 hr. 32 Minutes
18"x20"17 Inches1 hr. 32 Minutes

With a BBA No. 1 Photoflood (250 watts)

Screen SizeBulb HeightExposure Time
8"x10"12 Inches10 Minutes
10"x14"12 Inches10 Minutes
12"x18"15 Inches16 Minutes
16"x20"17 Inches20 Minutes
18"x20"17 Inches20 Minutes

Tips for exposing screens

  • The light makes the emulsion harden and bind to the fabric so where your black image is placed, the light is blocked, and the emulsion remains water-soluble
  • You can fine-tune the timing with practice; see here for guidance: Hunt The Moon Exposure Times
  • Avoid direct sunlight during this part of the screen printing process as it will expose the design you just burnt onto the screen
  • Next, spray down the screen with water (the pressure washer comes in handy here), washing off the non-bound emulsion where your image was positioned; this clear area is where ink will be pressed through the screen when you print
Current 1000w Screen Printing Exposure Light

Exposing Screen

Use block of  blacked out wood under the screen to push against the mesh and keep airtight againt glass

Exposing Screen

1000w light at 15 inches exposing for 4 minutes

Washing Screen

Washing out screen after exposure

Washing Screen

Washing screen with jet washer

Washing Screen

Washing screen with jet washer, make sure to clear out all emulsion where your design is exposed!

Blocking Holes

Once the emulsion is cleared start blocking out pinholes on the screen with tape

Blocking Holes

Blocking out pinholes on screen with tape

Masking Unsued Areas

Block out unused areas of your screens

Step 5 – Screen Printing Your Design

Equipment Needed


Paper to print onto.


Shirt to print the design onto.


Desired colour of water-based ink.


Squeeges to print with.

Now you are ready to print! Lay the screen on your t shirt/other fabric/paper/screen print poster, spread ink on the inside of the screen, and press the ink through the screen. You can use a spray bottle filled with water to help prevent your ink from drying up. Now let your design dry – you can speed up the process with a hairdryer or iron on textiles. You need to make sure to seal the ink with heat by ironing the shirt for a few minutes, put paper either side to help.

Tips for screen printing

  • Try to avoid any movement that could result in smudging
  • Make sure you let your print dry thoroughly after printing
  • Leave some space between the screen and the printing surface about 2mm
  • If you have white showing through the ink, apply more ink and some more pressure!
  • Pull the squeegee towards you at a 45-degree angle
  • Make sure the ink does not dry in the screen, keep moist in between printing

Inking Screen

Place ink about the width of the design

Charge Screen

Charge the screen with ink – Pull ink over design with no pressure applied

Print Ink

Push squeegee at 45 degree angle with pressure to push ink onto your garment

Step 6 – Clean Up

Equipment Needed

Jet Wash/Hose

Use a jet wash to clean screens.

Pregasol F

Pregasol F to decoat screens.

If you want to re-use your design, you can clean your screen by washing away the ink with water and a scrubby pad. If you want to remove your design completely you can soak your screen for a couple of minutes in emulsion remover Pregasol F, then use a scrubby pad to remove the design. I hope you enjoyed screen printing at home; the screen printing process is now complete!

Screens ready to be decoated

De-coating Screens

Screens ready to be decoated

Cleaning Screens After Printing

Old Screens

Screens ready to be decoated

Screen sprayed decoater Pregasol F

Spray Decoater

Screen sprayed decoater Pregasol F

Screen being scrubbed with Pregasol F

Scrub Screens

Screen being scrubbed with Pregasol F

Screen being jet washed after Pregasol F has degraded old emulsion

Start Jet Washing

Screen being jet washed after Pregasol F has degraded old emulsion

Degreasing screens for printing

Degrease Screens

Degrease screens before coating with emulsion

Screen Printing is such a wonderful thing. Now you know the basics for screen printing make sure you use your skills wisely, as with great skills, comes great responsibility.

Comments & Notes


  • George James says:

    Thank you so much for all this wonderful and helpful tips and knowledge, I really appreciate it! Thank you 🙂

    • Hickman Design says:

      No worries, glad that the guide has been of use to you I shall be planning out some more in depth information over the coming months.

  • ปั๊มไลค์ says:

    Like!! Really appreciate you sharing this blog post.Really thank you! Keep writing.

  • screen printing Texas says:

    Over this article you will get to know about a screen printing process. It is just a proper critique blog on the topic.I am really happy to come across this exceptionally well written content. Thanks for sharing and look for more in future!!

  • frolep rotrem says:

    Hello! I could have sworn I’ve been to this site before but after checking through some of the post I realized it’s new to me. Anyhow, I’m definitely glad I found it and I’ll be book-marking and checking back frequently!

  • Alex says:

    Hello! This is perfect guide for all who decides to start screen printing at home. Thank you but I think that need more information about screen reclaiming. My screen have lines of exposure time’s test after washing under pressure with Pregasol and idk what to do with it. I think that this information will be useful.

    • Hickman Design says:

      Hello Alex, hope you are well and thanks for the feedback. I am looking at more details for the screen reclamation section currently, I would say if you are still getting old designs showing after pressure washing you may need a chemical like Pregan Paste (https://www.jacksonsart.com/kiwo-pregan-paste-1kg-screen-printing-ghost-remover) to remove the old ghost images. Be careful with this chemical and make sure to use goggles and gloves as it is quite a strong chemical.

  • Philippe says:

    There is evidently a whole lot to know about this. I consider you created certain good points in capabilities also.

  • Sterling Discher says:

    Very good article post. Really looking forward to read more. Much obliged!.

  • Pamula Ridings says:

    Thanks for sharing, this is a fantastic article. Much thanks again. Awesome!.

  • Lamont Carmichael says:

    Really enjoyed this article. Thanks Again. Keep writing.

  • Lauren kim says:

    Hey thank you so much for sharing valuable steps really appreciate it. This is so helpful for those who wants to startup at Screen Printing business.

  • 3D Puff Embroidery says:

    I’ve been preparing artwork for screen printing for close to 8 years at a local shop using CorelDraw. Great post on screen printing techniques with Illustrator! You covered everything that’s necessary for spot color printing. This guide will finally help me to move on over to Illustrator. Thanks!

  • Noella says:

    Thank you for sharing your info. I truly appreciate your efforts and I am waiting
    for your further post thanks once again.

  • Joe says:

    Hi! I just want to give you a big thumbs up for the excellent info you have right here on this post.
    I am coming back to your web site for more soon.

  • 카지노 says:

    I?m not that much of a online reader to be honest but your blogs really nice, keep it up!
    I’ll go ahead and bookmark your site to come back in the future.


  • Md. Apel Hossain says:

    Excellent writing about screen printing.

  • lasertest says:

    Wonderful website. Plenty of useful information here. I’m sending it to
    some pals ans additionally sharing in delicious.
    And of course, thanks to your effort!

  • Alex says:

    This is an outstanding post that’s filled with so many useful nuggets. Thank you for being so detailed on Screen printing process.

  • Anna says:

    Ive been screen printing for years on paper. Any tips on how to make sure your paper is in the same place every time for multiple prints? We call them “guides” and have used everything from a thick laminate with adhesive on the back to just marking with sharpie.

    • Hickman Design says:

      Hello thanks for your question! So I would usually align the screen and paper and then tape some card on the corner edges making a right angle in each corner, the paper should align each time.

  • DennisCiz says:

    Hey, thanks for the blog article.Really looking forward to read more.

  • Kal says:

    Fat conversation
    Are there measurements of the amount of ink paste we need to print a specific design, meaning how many designs can we produce per liter of paste?

Leave a Reply to Alex Cancel Reply